SECTION 08517 

                           HOT ROLLED STEEL WINDOWS AND DOORS

PART 1 - GENERAL

1.1     WORK  INCLUDED:

1. A.   Furnish all labor and materials to complete the fabrication of windows and doors as shown on architect's drawings and as specified herein.  All windows and doors  covered by this specification shall be fabricated by Optimum Window Mfg. Corp., Ellenville, New York, whose name and products are used to establish the standard of workmanship and quality construction required for this project.  Other bidders must be approved by the architect at least ten days prior to the bid date through submission of samples and evidence showing that the bidder has been fabricating window products of this type and quality for at least five years.  All windows and doors must be domestically manufactured in the U.S.A.

All work shall include, but not be limited to the following: 

1.  Double extruded silicone weather-stripped windows & doors.
2.  All window and door mullions, covers trim and anchors.
3.  Insect screens for all operating ventilators. (optional).
4.  Factory applied powder coat finish.
5.  Hardware.
6.  Glazing